BRICKNOLOGY® is a mechanically secured brick slip cladding product.

45kg/m2 when dry and up to 65kg/m2 when wet.

UK brick dimensions:

Standard slips: 215 x 65mm (25mm thick)

Corner slips: 102 x 215 x 65mm

BRICKNOLOGY® is also compatible with alternative brick sizes, please contact us to discuss any non-standard requirements further.

25mm for purpose cut brick slips.

Starter & Top Rails are 1200 x 75mm

Middle interlocking rails are 2400 x 75mm

Depending on the project quantities and brick slip type, we endeavour to supply metal support rails within 6 weeks and brick slips within 12 weeks, from confirmation of order and schedule of quantities.

60 pcs per m2, inclusive of 10mm mortar joints surrounding the brick slips.

The product achieved European Technical Assessment (ETA) in early 2023. Please visit the TESTING page of our website for further information.

Additional test programs are planned - please contact us for further information on those.

Experienced teams of BRICKNOLOGY® registered and approved third party installers.

Depending on the design and project circumstances, BRICKNOLOGY® should always be 4-5 times faster to install than traditional brickwork.

Any type of aluminium or steel secondary carrier rail systems, hybrid curtain walling and unitised facade systems, structural composite panels, and offsite modular systems.

No. There is no limit BRICKNOLOGY® can be installed to on building height, subject to the appropriate facade engineering calculations being provided by a suitable professional.

As part of our ETA testing, BRICKNOLOGY® was subjected to -6600Pa of wind suction pressure without any damage.

BRICKNOLOGY® has been designed to accommodate the production tolerance of each specific brick type used. For further information on these, please contact us.

A minimum 5.5 x 19-22mm Stainless Steel self-drilling screw with neoprene washer is recommended.

BRICKNOLOGY® brick slips, metal support rails and mortar are Euroclass A1 in accordance with EN 13501-1 and Delegated Regulation 2016/364.

BRICKNOLOGY® natural kiln fired clay brick slips, steel metal support rails and mortar are non-combustible materials.

Yes, they are 100% recyclable if successfully un-installed from their primary installed location.

Yes. We recommend a maximum 12m between movement joints and any distance between movement joints in the building substructure below 12m should be replicated in the BRICKNOLOGY® clad area.

BRICKNOLOGY® interlocking metal support rails should be broken, to stop-start at all movement joint location. Please ask for any further details on this.

No, currently the product must be pointed with BRICKNOLOGY® mortar.

Yes. As long as either the starter or top rail are fixing in the correct location, the middle interlocking rails can be installed from the bottom/upwards or the top/downwards.

We have over 400+ colours and textures available as standard from a wide range of brick or brick slip producers that can be used with BRICKNOLOGY®. Please contact us to find out more.